Global Part Numbering

 

 

 

 

Links/Videos:

 

This command allows you to define the part numbering of each document types with texts, data (project name, customer name,...) an a counter.

This is a global part numbering for all the new projects.

 

Creation stages / Use:

 

Select Pdm > Part Numbering... from the TopSolid button.

 

Click Add Type to select the type of document on which you want to define the reference then use the Add counter, Add string and Add data buttons to define the information to display in the reference of the documents.

An example of the defined part numbering is displayed at the bottom of the window.

 

 

  • Part numbering can also be defined locally on the project level by using the Part Numbering contextual command from the project tree.

  • As a reminder, the reference of a document is visible (and can be modified) from the project tree using the Properties contextual command of this document or from the Parameters > System parameters folder of the entities tree when the document is opened.

 

 

The defined part numbering does not affect existing documents. To modify the part number of an  existing documents, use the New part number option of the Properties contextual command from the document.

 

 

Available Options:

 

 

 

The counter increments for each new creation. It can be made of numbers (numerical) or letters (alphabetical).

The initial value corresponds to the start value of the counter.

The minimum number of characters allows you to get a reference with always the same number of characters.

The fill character allows you to define the character to use when the minimum number of characters if different than 1.

For example with a minimum number of 3 and the fill character 0, you will get the following counter: 001, 002, etc

For example with a minimum number of 3 and the fill character -0, you will get the following counter: --1, --2, etc

 

 

 

Allows you to enter characters (or separators).

 

 

 

Select the data type to display, such as project name, folder name, creation date or other.

For the creation date, you must also enter the date format.

 

 

 

When this option is checked, the part numbering is applied as soon as the document is created.

 

 

 

This option allows you to check the unicity of the reference during its modification.

It can be activated even when no part numbering has been defined.

 

Modifications / Additional information:

 

You can change, delete or re-order the part numbering using the Modify, Delete, Up or Down buttons.