Detailed view

 

 

 

 

This command allow a detail of an existing view to be created.

This detail will be accentuated using a scale factor.

 

Creation stages:

 

Click the icon or select the command View > Detail view... from the drop-down menu.

 

  1. Select the reference view.

  2. Sketch the boundary of the detail view.

  3. Validate the sketch.

  4. Configure the detailing of the detail view (name, text style and font).

  5. Set the detail view.

 

 

  • You can easily move the frame of the detail view by selecting and dragging it.

  • For the title text, there is a snap to capture characteristic points (center, left, right, ...) during its displacement. By using the "Alt" key when moving the text, the snap is deactivated.

 

 

If the boundary sketch is not close, the view will be invalid.

 

 

Available Options:

 

Existing detail sketch: This option allows you to use a detail sketch created with the Detail Sketch... command.

This detail sketch can have been defined in the same document (Internal mode) or in another document (External mode).

 

Projection:

 

 

Select the view style to use here: normal view style (default style) or a customized view style.

 

Detail Area:

  • Font: Allows to customize the font of the view title (font, text height, style).

  • Line: Detail area line can be defined. They can inherit from the used style or manually defined.

    • Attributes: You can define the line type, its thickness and its color (the button allows to use the original color of the projected part).

    • The Half tone cell allows you to use the half tone of the selected color.

 

  • Coordinates: The grid setting allows to sleek detailing elements to position. The coordinates can be cartesian (following X and Y) or polar (radial and angular steps). Enter corresponding values.

  • Magnetization: The magnetization is a hook factor regarding the entered step. If the step is 10mm and the magnetization is 2, detailing elements and dimensions of the view can be moved every 5 mm. If the step is 10mm and the magnetization is 10, detailing elements and dimensions of the view can be moved every mm.

 

Modifications:

 

Using the right button on an existing main view allows: