Switch unfolding rules parameters

 

 

 

Links / Videos :

 

 

This command allows to select an Unfolding rules document depending on a material.

The purpose of this parameter is to be used in the Sheet metal > Unfolding rules command by setting it in Parameter mode in order to change the rule depending on the value of the parameter.

 

Creation stages / Use:

 

Select the Construction > Parameters > Other Parameters > Switch Unfolding Rules Parameter... command from the drop-down menu.

 

  1. Enter the name of the parameter.

  2. In the Switch table, select the Unfolding rules document to use for each entered material.

  3. Select the Unfolding rules document to use by default (it will be used when part material is not available in the table).

  4. Validate.

 

 

 

Available options:

 

 

 

This option allows to display a warning when the part material is not available in the switch table.