Non-uniform scaling transform

 

 

 

 

This command deforms an element along the axes of a reference frame by giving a deformation factor for each one.

 

Click the icon or select the Construction > Transforms > Non-uniform scaling transform... command from the drop-down menu.

 

  1. Select the frame to use for the transform. It will be the center point and will indicate directions.

  2. Enter the scaling factors according to these 3 directions.

  3. Validate the command with .

 

Transform by non-uniform scaling. In this example, factor following Y (Depth) is set to 2, factor following Z (Height) is set to 0.5 (result preview is displayed in orange).

 

View other available transforms.