This command constrains a point of the part to be included in relation to an axis of the destination geometry.

Creation stages / Use:

Click the icon or select Assembly > Point on Axis... from the drop-down menu.

It is also possible to add constraints in a configuration of a mechanism. In this case, select the Mechanism > Point on axis... command the drop-down menu.

1. Select a point on the geometry to be included.

2. Select an axis on the destination geometry.

3. Enter the distance.

Modifications / Additional information:

The modification can be carried out either via the popup menu with the Edit Point on axis command or by clicking on the labels.

Double-clicking the positioning label changes the name of the constraint.