|
Graphics:
Accelerated
drawing of fast draft views: Allows you to hide
the image of the view and not to recalculate except for
zooming. Certain maps do not support this mode, in this
case, uncheck the option. Optimize
edge drawing for thin shapes: Allows display defects
of graphics cards to be corrected for the hidden edges
of thin parts Accelerated
drawing of transparency: The transparency quality
is slightly deteriorated during dynamic displacements
to increase display performance. Draw
edges of draft with thin width: Allows to display
all lines of the draft with thin width. Of course, when
printing, lines will have the correct width. Draw
silhouettes in wireframe render modes: When a cylinder
in perspective is in wireframe render, it is displayed
with only 2 circles. This option allows to also display
the 2 lines. Turning on this option decreases graphic
performances. Transparent
shapes hide edges: In this case, transparent shape
is considered as opaque. Highlight
detected faces: Detected faces are framed as during
selection, but also colored. Highlight
selection of parts in tree: Display a wired echo
of the hidden geometries when making a selection or zooming
from a tree (Entities, Parts...). Display
scale bar: Allows you to display the scale bar
in the bottom right-hand side of the screen. Hardware
antialiasing: This
option allows to increase the quality of the 3D display, but
also by increasing the use of video memory. The display rate
is reduced. This option is natively managed with recent video
cards. The proposed values are given by the video card driver.
If it is grayed, the driver doesn't manage the hardware antialiasing.
The default value is 1 (antialiasing is deactivated). Middle
faces: This option allows
you to modify the attributes (color, type, and line thickness)
of the mid-face curves. |
icon or select the Tools > Options...
command from the drop-down menu.