Cutting

 

 

 

 

Links / Videos :

 

 

This command allows cut a part according to a profile.

 

Creation stages / Use:

 

Select the Wood > Cut ... command from the drop-down menu (for a document part or assembly)

For a Panel document, use the Modeling > Cut ... command.

 

  1. Choose the shape to modify

  2. Select a profile, it is according to this profile that the part will be cut.

  3. Check Extend profile, if the profile is shorter than the shape to be cut.

  4. Check or uncheck Reverse to reverse the side of the cutout.

  5. Choose a direction for the cutting operation.

  6. Angle the cutting operation if necessary.

 

Example of a Cutting operation

 

 

 

 

This operation will generate an MF that will be useful for machining.

 

 

Available options:

 

 

 

The tools are hidden by checking this option. By unchecking this option, the tools remain visible and can be used for another command.

 

 

 

 

This option allows you to assign a machining process to the operation. This machining process can then be retrieved by TopSolid'Cam. It can also assign a color to the operation.

                          1.Select a machining process document from the drop-down list.

                          2.Choose a process from the drop-down list.