Angle measurement
|
|
Angle measurement |
This command measures the evolution of an angle during the simulation.
Creation stages / Use:
Click the icon or select Simulation > Measurements > Angle Measurement... command from the drop-down menu.
Select the first rigid group.
Select the second rigid group.
Select the normal direction at the angle to be measured.
Select the first direction of the angle to be measured.
Select the second direction of the angle to be measured.
Check Multi-turns if the angle can be higher than 180°
Drop the measurement created in the entities tree in the desired simulation(s).
|
|
The direction of selected axes/edges is important to define the initial angle value. |
