This option allows to modify the polygonization of the parts to nest.

Creation stages / Use:

Select the Nesting > Nesting... command from the options menu of the nesting document.

1. Modify the linear and angular tolerance of polygonization.

2. Validate by clicking on .

The polygonized part is sent to the nesting solver which doesn't know splines and arcs. TopSolid creates a polygonization of the profiles to nest. It guarantees that all the section is into the placing polygon. The profiles are previously decomposed in arcs and lines, then the arcs arcs are polygonized by keeping the material inside the nesting polygon.

• Create all part occurrences for repeated supporst (for part counting in bill of material): This option allows you to actually create each identical support occurrence in the nesting document. This option should only be chosen if the BOM is created from the nesting document to obtain the correct number of parts, as this is expensive and can lead to a drop in performance when there are many parts.