In the case of a plunge inside material the safety distance (sd) is applied before the plunge.
In the case of a plunge outside material the safety distance (sd) is applied after the plunge.
| In the case of a plunge inside material the safety distance (sd) is applied before the plunge.
|
In the case of a plunge outside material the safety distance (sd) is applied after the plunge.
|
 |
Rapid feed rate The feed rate during the plunge is done in rapid only outside material.
|
 |
Machining The feed rate during the plunge is the same as the machining feed rate defined in the tool cutting conditions or locally in the operation.
|
 |
Maximum feed rate The feed rate during the plunge is the same as the maximum feed rate defined in the tool cutting conditions or locally in the operation
|
 |
Custom feed rate The feed rate during the plunge is the same as the custom feed rate defined in the operation. |
 |
Feed rate factor The feed rate during the plunge is proportional to the machining feed rate defined in the tool cutting conditions or locally in the operation |