Element like parameters can be copied and pasted with this command, they must be selected from the Entities tree.
|
|
Entity Copy |
This command allows to make a basic copy of one or several elements.
Creation stages / Use:
Select the Tools > Entity Copy... command from the drop-down menu.
Select the entities to copy in the graphic area or the Entities tree.
Select the reference frame that will be used as origin during the pasting.
|
|
Element like parameters can be copied and pasted with this command, they must be selected from the Entities tree. |
There is no link between pasted elements. For example, when a shape is generated by the extrusion of a sketch (the extruded shape depends on the sketch), you'll get a sketch and a shape not linked anymore.
The operations are not kept, the topology is copied/pasted only.
When a conflict is detected, the - Copy suffix is added to the element's name.
The copied elements can be pasted into the same document or into another document type (element of a Design document can be pasted into a machining document and vice-versa).
This command is not available in a Drafting or a BOM document.