Transformer

Transform

In a Drawing document, this command allows to transform selected entities (move, rotate, change scale, symmetry, ...).

Creation stages / Use:

Click the icon or select the Sketch > Transform... command from the drop-down menu.

Entities to be transformed must be selected BEFORE using this command.

Available options:

Translation: allows to move by translation selected entities.

	By two points: Select 2 points to indicate the direction and the distance of displacement.
	By vector: Enter the distance following X and following Y.
	By angle and distance: Enter an angle and the distance of displacement.

Rotation: allows to turn selected entities.

Scaling: allows to change the scale selected entities.

Symmetry: allows to symmetrize selected entities.

	Around point: Select the point center of symmetry.
	Around horizontal axis: Enter the distance between the symmetry horizontal axis and the X absolute axis.
	Around vertical axis: Enter the distance between the symmetry vertical axis and the Y absolute axis.

Region: Select if the region to stretch is rectangular or circular.

	Rectangular: Select the first and the second point of the rectangle.
	Circular: Select the circle center and enter its radius.

The stretched region must enclosed entities to stretch/move.

The rectangle to stretch is black, the stretched region in cyan	The stretched rectangle