Thickened

This command allows to create an operation to thicken on open profile with the mode centered, one side or two sides. Extremities joints can also be managed.

Creation stages / Use:

Click the icon or select the 2D sketch > Operations > Thickened... command from the drop-down menu.

Select the profile to thicken.
The selected profile will be converted to a construction profile, by checking the Construction option.
Select the type of offset.

The thickness is distributed on both sides of the reference profile.

- Enter the total thickness.

The thickness is on one side of the reference profile.

- Enter the total thickness.
- Select the side by clicking the yellow arrow in the workspace area.

The thickness is on both sides of the reference profile.

- Enter the thickness for the first side.
- Enter the thickness for the second side.
- Select the side by clicking the yellow arrow in the workspace area. The double arrow indicates the second side.

Check or not Rounded joints.


Without rounded joints	With rounded joints

Select the extremity joint:

External arcs:

The center of extremity arcs is coincident with the extremity of the reference profile.

Internal arcs:

The arc is coincident with the extremity of the reference profile.

Lines:

Lines are perpendicular to the reference profile and coincident with the extremity of the reference profile.

Validate by clicking .

If the profile is closed, use the Parallel command.

Example of creation of a thickened profile.

(In blue: reference profile, in orange : the thickened profile with centered mode).

Modifications / Additional information:

The Tolerance contextual command allows to modify this approximation.