This command allows you to set the process parameters needed to compute correctly the Plastic flow analysis.

Creation stages / Use:

Click the icon or choose the command Analysis > Process parameters... from the drop-down menu.

1. The shape field is grayed because it is possible to manage a shape at once.

2. Set the Filling time needed to get the part.

3. Set Pressure controlled filling.

4. Set Melt temperature.

5. Set Wall temperature.

6. Set Ejection temperature.

or

1. Click on Recommanded values to let TopSolid'PlasticFlow sets the different fields.

Modifications / Additional information:

• You can modify the process parameters by clicking again on the icon , by choosing the command  Analysis > Process parameters... from the drop-down menu or from the operations window of the Plastic Flow analysis document.