Molding Areas Mapping

 

 

 

 

 

This command allows you to define a color chart to best "visualize" the different areas to be molded. Be careful, depending on the definition of the parting line edges, the zones may "change" color. They are therefore not fixed and can be recalculated "as needed". It is a smart idea to make this setting in the Split template document.

 

Creation stages / Use:

 

Choose the Split Blocks > Colors > Molding Areas Mapping... command from the Options tree of a Split document.

 

 

  1. Determine the desired colors for the areas.

  2. Validate .

 

Available options:

 

 

 

  • 4 different areas can be identified on the shape to split.