Ejection Stroke Parameter

 

 

 

 

 

This command allows you to easily create an  Ejection Stroke Parameter based on the parts and core cavity blocs included in the mold document. This stroke can then be chosen to calculate the Mold Simulation.

 

Creation stages / Use:

 

Select Construction > Parameters > Other Parameters > Ejection Stroke Parameter... command from the drop-down menu.

 

  1. Choose the name of the parameter to be created.

  2. Apply the calculation mode of the desired parameter.

  3. Depending on the desired reference direction.

  4. The result of the parameter calculation is given as an indication.

  5. Validate .

 

 

 

  • It is possible to create this parameter directly, via the button, in the Mold Simulation command.

 

 

 

Available options:

 

  • Name : By default the parameter is named Ejection Stroke. It is possible to choose a new name.

  • Mode : Three modes of automatic calculation of the parameter are proposed:

    Inferior and superior blocks extremities

    Inferior part and superior blocks extremities

    Part extremities

 

  • Reference direction: This option is used to calculate the parts extremes of the chosen mode in this direction.

  • Result:  The result of the parameter calculation is given as an indication.