Modify Drillings

This command allows you to simultaneously modify the diameter and the overlap of several drillings, from the cooling sketch.

Creation stages / Use:

Click the icon or select the 3D Sketch > Cooling > Modify Drillings... command from the drop-down menu. It is also possible to launch it from the context menu, after having selected or not, one or more drillings of the circuit.

Choose the drillings to modify.
And determine their new diameter and/or new overlap.
Validate .

This command is accessible only when editing a cooling circuit.

Available options:

Modify drillings:

Reference drilling: the reference drilling defines the default values for diameter and overlap. At the change of the reference drilling, the previous values are overwritten, and the possible changes are unchecked.
Additional drillings: List the additional drillings to modify. Upon validation, the reference drilling and any additional drillings are modified.
Hide: This option allows you to hide the selected drillings during the selection. At the validation of the command, each drilling becomes visible again.

Parameters:

Diameter: If checked, the drilling style is scraped and its diameter value changed.
Overlap: If checked, we scrape the drilling style and change the two drilling overlaps.

Modifications / Additional information:

If the command is called without pre-selection, the dialog arrives empty.
If one or more drillings are pre-selected, the dialogue arrives with the first drilling selected as a reference and the others as additional drillings.
Changed drillings "come out" of the style. So they take the color of a forced drilling.