Angle relief
|
|
Angle relief |
This command allows rapid production of fillets or 45° chamfers on the lateral faces of a sheet.
Creation stages / Use:
Click the 
icon or select Sheet metal > Angle Relief... from the drop-down menu.
Select the type of corners to be made (fillet or chamfer).
Select the mode for managing fillets or chamfers:
Identical: the same radius or chamfer value is applied to all the edges selected.
Different: the radius or chamfer value is managed independently on each edge selected.
Enter the value of the fillet(s) or chamfer(s).
Select the edges.
Validate the creation with the 
button.
|
|
Only edges of lateral faces of the sheet metal may be selected. |
