This document allows you to create your own screw spot facing standard for cylindrical and hexagonal head screw.

Creation stages / Use:

Create a new document by clicking on icon, then choose in Special tab.

1. Define the different diameters used by this new standard by filling:

   • This diameter description (for example M12 for Metric or 1/4" for ANSI)

   • The nominal diameter

   • The diameter of cylindrical head screw usable with this standard.

   • The diameter of hexagonal head screw usable with this standard.

   • Check if the use of this diameter is occasional or not. When using this standard, occasional diameters are highlighted in green.

2. Save and check in this document.