This mode allows the sketch's projection mode to be enabled or disabled

Use:

Click the icon or select the 2D sketch or 3D sketch > Modes > Projection command from the drop-down menu.

• When the projection mode is enabled, hooking of the point clicked is projected in the support plane of the current sketch.

• When the projection mode is disabled, only hooking of the point clicked in the support plane of the current sketch is possible.

Example:

• When the mode is activated, the green points selection is possible.

• If the mode is deactivated, only the red points selection is possible.

Additional information:

This mode is enabled when the icon is pressed down. (background stays in color).